Доброго времени суток дорогие форумчане. Помогите решить проблему или подскажите в чем дело. Хочу замоделить процесс работы шнека в трубе, что-то типа экструдера. Сделал шнек. Вокруг шнека нарисовал цилиндр. В CFX создал 2а домена. Домен шнека указал как immersed solid, задал для этого домена систему координат и задал вращение. Граничные условия для трубы, имитирующей материал, задал как свободный выход (Opening), а на входе массовый расход. Так же инициализировал домен для жидкости . Расчет делаю Transient. Также использую созданный мною метериал похожий на расплав пластика .
Теперь, что касается вопросов: После расчета получается, что сам шнек вращается, но эфекта от его вращения нет. Как и нет увеличения давления на выходе. Также возникают большие разряжения. Может кто подскажет как более правильно сделать данный расчет
В результате моделирования хочу получить расход вещества, момент на валу.
| Вложение | Размер |
|---|---|
 shnek_2.jpg | 164.41 КБ |
| shnek_i_pik.jpg | 171.83 КБ |
В нагрузку к началу поста.
+--------------------------------------------------------------------+
| |
| CFX Command Language for Run |
| |
+--------------------------------------------------------------------+
LIBRARY:
COORDINATE FRAME DEFINITIONS:
COORDINATE FRAME: coord for drill
Centroid Type = Absolute
Invert Normal Axis Direction = Off
Location = coord
Option = Point and Normal
Origin = -1.07085e-010 [m], 1.36747e-008 [m], 0 [m]
Point on Axis 3 = -1.07085e-010 [m], 1.36747e-008 [m], -1 [m]
Point on Plane 13 = 1 [m], 0 [m], 0 [m]
Reference Coord Frame = Coord 0
END
END
MATERIAL: PEEK
Material Group = User
Option = Pure Substance
PROPERTIES:
Option = General Material
EQUATION OF STATE:
Density = 1310 [kg m^-3]
Molar Mass = 10000000 [g mol^-1]
Option = Value
END
SPECIFIC HEAT CAPACITY:
Option = Value
Specific Heat Capacity = 1.34 [J kg^-1 K^-1]
Specific Heat Type = Constant Pressure
END
DYNAMIC VISCOSITY:
Dynamic Viscosity = 350 [Pa s]
Option = Value
END
THERMAL CONDUCTIVITY:
Option = Value
Thermal Conductivity = 0.25 [W m^-1 K^-1]
END
THERMAL EXPANSIVITY:
Option = Value
Thermal Expansivity = 0.00001 [K^-1]
END
END
END
END
FLOW: Flow Analysis 1
SOLUTION UNITS:
Angle Units = [rad]
Length Units = [m]
Mass Units = [kg]
Solid Angle Units = [sr]
Temperature Units = [K]
Time Units = [s]
END
ANALYSIS TYPE:
Option = Transient
EXTERNAL SOLVER COUPLING:
Option = None
END
INITIAL TIME:
Option = Automatic with Value
Time = 0 [s]
END
TIME DURATION:
Option = Total Time
Total Time = 1 [s]
END
TIME STEPS:
Option = Timesteps
Timesteps = 0.05 [s]
END
END
DOMAIN: DRILL
Coord Frame = coord for drill
Domain Type = Immersed Solid
Location = B379
BOUNDARY: DRILL Default
Boundary Type = WALL
Location = \
F29.379,F30.379,F31.379,F32.379,F33.379,F34.379,F35.379,F794.379
END
DOMAIN MODELS:
DOMAIN MOTION:
Angular Velocity = 5 [rev s^-1]
Option = Rotating
AXIS DEFINITION:
Option = Coordinate Axis
Rotation Axis = coord for drill.3
END
END
END
END
DOMAIN: PEEK
Coord Frame = Coord 0
Domain Type = Fluid
Location = B17
BOUNDARY: inlet
Boundary Type = INLET
Coord Frame = Coord 0
Location = inlet
BOUNDARY CONDITIONS:
FLOW REGIME:
Option = Subsonic
END
MASS AND MOMENTUM:
Normal Speed = 5 [mm s^-1]
Option = Normal Speed
END
MESH MOTION:
Option = Stationary
END
TURBULENCE:
Option = Medium Intensity and Eddy Viscosity Ratio
END
END
END
BOUNDARY: outlet
Boundary Type = OPENING
Location = outlet
BOUNDARY CONDITIONS:
FLOW DIRECTION:
Option = Normal to Boundary Condition
END
FLOW REGIME:
Option = Subsonic
END
MASS AND MOMENTUM:
Option = Opening Pressure and Direction
Relative Pressure = 1 [atm]
END
MESH MOTION:
Option = Stationary
END
TURBULENCE:
Option = Medium Intensity and Eddy Viscosity Ratio
END
END
END
BOUNDARY: wall
Boundary Type = WALL
Location = wall
BOUNDARY CONDITIONS:
MASS AND MOMENTUM:
Option = No Slip Wall
Wall Velocity Relative To = Mesh Motion
END
MESH MOTION:
Option = Stationary
END
WALL ROUGHNESS:
Option = Smooth Wall
END
END
END
DOMAIN MODELS:
BUOYANCY MODEL:
Buoyancy Reference Temperature = 23 [K]
Gravity X Component = 0 [m s^-2]
Gravity Y Component = 0 [m s^-2]
Gravity Z Component = 9.81 [m s^-2]
Option = Buoyant
BUOYANCY REFERENCE LOCATION:
Option = Automatic
END
END
DOMAIN MOTION:
Option = Stationary
END
MESH DEFORMATION:
Displacement Relative To = Initial Mesh
Option = Regions of Motion Specified
MESH MOTION MODEL:
Option = Displacement Diffusion
MESH STIFFNESS:
Option = Increase near Small Volumes
Stiffness Model Exponent = 2.0
REFERENCE VOLUME:
Option = Mean Control Volume
END
END
END
END
REFERENCE PRESSURE:
Reference Pressure = 1 [atm]
END
END
FLUID DEFINITION: PEEK
Material = PEEK
Option = Material Library
MORPHOLOGY:
Option = Continuous Fluid
END
END
FLUID MODELS:
COMBUSTION MODEL:
Option = None
END
HEAT TRANSFER MODEL:
Fluid Temperature = 25 [C]
Option = Isothermal
END
THERMAL RADIATION MODEL:
Option = None
END
TURBULENCE MODEL:
Option = SST
BUOYANCY TURBULENCE:
Option = None
END
END
TURBULENT WALL FUNCTIONS:
Option = Automatic
END
END
INITIALISATION:
Option = Automatic
INITIAL CONDITIONS:
Velocity Type = Cartesian
CARTESIAN VELOCITY COMPONENTS:
Option = Automatic with Value
U = 0 [m s^-1]
V = 0 [m s^-1]
W = 0 [m s^-1]
END
STATIC PRESSURE:
Option = Automatic with Value
Relative Pressure = 1 [atm]
END
TURBULENCE INITIAL CONDITIONS:
Option = Medium Intensity and Eddy Viscosity Ratio
END
END
END
END
OUTPUT CONTROL:
RESULTS:
File Compression Level = Default
Option = Standard
END
TRANSIENT RESULTS: Transient Results 1
File Compression Level = Default
Option = Standard
OUTPUT FREQUENCY:
Option = Every Timestep
END
END
END
SOLVER CONTROL:
Turbulence Numerics = First Order
ADVECTION SCHEME:
Option = High Resolution
END
CONVERGENCE CONTROL:
Maximum Number of Coefficient Loops = 10
Minimum Number of Coefficient Loops = 1
Timescale Control = Coefficient Loops
END
CONVERGENCE CRITERIA:
Residual Target = 1.E-4
Residual Type = RMS
END
IMMERSED SOLID CONTROL:
BOUNDARY MODEL:
Option = None
END
END
TRANSIENT SCHEME:
Option = First Order Backward Euler
END
END
END
COMMAND FILE:
Version = 17.2
Results Version = 17.2
END
SIMULATION CONTROL:
EXECUTION CONTROL:
EXECUTABLE SELECTION:
Double Precision = Yes
Large Problem = No
END
INTERPOLATOR STEP CONTROL:
Runtime Priority = Standard
MEMORY CONTROL:
Memory Allocation Factor = 1.0
END
END
PARALLEL HOST LIBRARY:
HOST DEFINITION: workstationz800
Host Architecture String = winnt-amd64
Installation Root = C:\Program Files\ANSYS Inc\v%v\CFX
END
END
PARTITIONER STEP CONTROL:
Multidomain Option = Automatic
Runtime Priority = Standard
MEMORY CONTROL:
Memory Allocation Factor = 1.0
END
PARTITION SMOOTHING:
Maximum Partition Smoothing Sweeps = 100
Option = Smooth
END
PARTITIONING TYPE:
MeTiS Type = k-way
Option = MeTiS
Partition Size Rule = Automatic
Partition Weight Factors = 0.08333, 0.08333, 0.08333, 0.08333, \
0.08333, 0.08333, 0.08333, 0.08333, 0.08333, 0.08333, 0.08333, \
0.08333
END
END
RUN DEFINITION:
Run Mode = Full
Solver Input File = Fluid Flow CFX.def
Solver Results File = \
D:/Extrud/pum_pum_1_pending/dp0_CFX_1_Solution_1/Fluid Flow \
CFX_001.res
END
SOLVER STEP CONTROL:
Runtime Priority = Standard
MEMORY CONTROL:
Memory Allocation Factor = 1.0
END
PARALLEL ENVIRONMENT:
Number of Processes = 12
Start Method = Intel MPI Local Parallel
Parallel Host List = workstationz800*12
END
END
END
END
+--------------------------------------------------------------------+
| |
| Partitioning |
| |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| |
| ANSYS(R) CFX(R) Partitioner |
| |
| Release 17.2 |
| Build 17.2 2016.07.18-16.51-136427 |
| Mon Jul 18 17:14:29 GMTDT 2016 |
| |
| Executable Attributes |
| |
| double-64bit-int32-archfort-optimised-noprof-lcomp |
| |
| (C) 2016 ANSYS, Inc. |
| |
| All rights reserved. Unauthorized use, distribution or duplication |
| is prohibited. This product is subject to U.S. laws governing |
| export and re-export. For full Legal Notice, see documentation. |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| Job Information at Start of Run |
+--------------------------------------------------------------------+
Run mode: partitioning run
Host computer: WORKSTATIONZ800 (PID:5604)
Job started: Fri Nov 18 00:16:50 2016
+--------------------------------------------------------------------+
| Memory Allocated for Run (Actual usage may be less) |
+--------------------------------------------------------------------+
| Real | Integer | Character | Logical | Double
----------+------------+------------+-----------+----------+----------
Mwords | 5.85 | 46.19 | 6.82 | 0.12 | 0.00
Mbytes | 44.63 | 176.22 | 6.50 | 0.46 | 0.00
----------+------------+------------+-----------+----------+----------
+--------------------------------------------------------------------+
| Host Memory Information (Mbytes) |
+--------------------------------------------------------------------+
| Host | System | Allocated | % |
+-------------------------+----------------+----------------+--------+
| WORKSTATIONZ800 | 28655.23 | 227.81 | 0.79 |
+-------------------------+----------------+----------------+--------+
+--------------------------------------------------------------------+
| The MeTiS partitioning method allocates additional memory. |
| Total memory usage will therefore exceed the values shown above. |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
Domain Name : PEEK
Total Number of Nodes = 1010492
Total Number of Elements = 985005
Total Number of Prisms = 8586
Total Number of Hexahedrons = 976419
Total Number of Faces = 58508
Domain Name : DRILL
Total Number of Nodes = 107169
Total Number of Elements = 536794
Total Number of Tetrahedrons = 536794
Total Number of Faces = 67644
Global Statistics :
Global Number of Nodes = 1117661
Global Number of Elements = 1521799
Total Number of Tetrahedrons = 536794
Total Number of Prisms = 8586
Total Number of Hexahedrons = 976419
Global Number of Faces = 126152
+--------------------------------------------------------------------+
| Vertex Based Partitioning |
+--------------------------------------------------------------------+
Partitioning of domain: PEEK
- Partitioning tool: MeTiS multilevel k-way algorithm
- Number of partitions: 12
- Number of graph-nodes: 1010492
- Number of graph-edges: 6010924
+--------------------------------------------------------------------+
| Iso-Partition Connection Statistics |
+--------------------------------------------------------------------+
| Domains in Group | | Vertices |
| | Smooth +---------+----------+----------+
| | Sweeps | Moves | <25% | <50% |
+---------------------------+--------+---------+----------+----------+
| PEEK | 3 | 72 | 0 | 0 |
+---------------------------+--------+---------+----------+----------+
+--------------------------------------------------------------------+
| Partitioning Information |
+--------------------------------------------------------------------+
Partitioning information for domain: PEEK
+------------------+------------------------+-----------------+
| Elements | Vertices | Faces |
+------+------------------+------------------------+-----------------+
| Part | Number % | Number % %Ovlp | Number % |
+------+------------------+------------------------+-----------------+
| Full | 985005 | 1010492 | 58508 |
+------+------------------+------------------------+-----------------+
| 1 | 82762 8.2 | 87025 8.1 2.9 | 6585 11.0 |
| 2 | 86935 8.6 | 91589 8.6 5.9 | 4637 7.7 |
| 3 | 83791 8.3 | 88404 8.3 5.7 | 4777 8.0 |
| 4 | 83853 8.3 | 88686 8.3 6.3 | 4681 7.8 |
| 5 | 83570 8.2 | 88350 8.3 6.2 | 4689 7.8 |
| 6 | 85911 8.5 | 90642 8.5 6.1 | 4621 7.7 |
| 7 | 85340 8.4 | 90266 8.4 6.4 | 4715 7.9 |
| 8 | 83972 8.3 | 88605 8.3 6.0 | 4633 7.7 |
| 9 | 85464 8.4 | 90036 8.4 5.8 | 4623 7.7 |
| 10 | 82902 8.2 | 87251 8.1 3.2 | 6519 10.9 |
| 11 | 84463 8.3 | 89487 8.4 6.7 | 4711 7.9 |
| 12 | 85554 8.4 | 90490 8.5 6.3 | 4821 8.0 |
+------+------------------+------------------------+-----------------+
| Min | 82762 8.2 | 87025 8.1 2.9 | 4621 7.7 |
|(part)| ( 1)| ( 1 1)| ( 6)|
+------+------------------+------------------------+-----------------+
| Max | 86935 8.6 | 91589 8.6 6.7 | 6585 11.0 |
|(part)| ( 2)| ( 2 11)| ( 1)|
+------+------------------+------------------------+-----------------+
| Ave | 84543 8.3 | 89236 8.3 5.6 | 5001 8.3 |
+------+------------------+------------------------+-----------------+
| Sum | 1014517 100.0 | 1070831 100.0 | 60012 100.0 |
+------+------------------+------------------------+-----------------+
+--------------------------------------------------------------------+
| Partitioning CPU-Time Requirements |
+--------------------------------------------------------------------+
Preparations 8.00E-01 17.4 %
Low-level Mesh Partitioning 1.15E+00 24.9 %
File Reading 5.30E-01 11.5 %
Partition Smoothing 9.95E-01 21.6 %
Topology - Global 8.00E-02 1.7 %
Topology - Element/Face/Patch 1.55E-01 3.4 %
Topology - Vertex 5.50E-02 1.2 %
Data Compression 5.00E-03 0.1 %
Variable Updates 5.00E-03 0.1 %
File Writing 6.50E-02 1.4 %
Miscellaneous 7.70E-01 16.7 %
--------
Total 4.61E+00
+--------------------------------------------------------------------+
| Job Information at End of Run |
+--------------------------------------------------------------------+
Host computer: WORKSTATIONZ800 (PID:5604)
Job finished: Fri Nov 18 00:16:55 2016
Total wall clock time: 4.600E+00 seconds
or: ( 0: 0: 0: 4.600 )
( Days: Hours: Minutes: Seconds )
+--------------------------------------------------------------------+
| |
| Solver |
| |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| |
| ANSYS(R) CFX(R) Solver |
| |
| Release 17.2 |
| Build 17.2 2016.07.18-16.51-136427 |
| Mon Jul 18 17:14:29 GMTDT 2016 |
| |
| Executable Attributes |
| |
| double-64bit-int32-archfort-optimised-noprof-lcomp |
| |
| (C) 2016 ANSYS, Inc. |
| |
| All rights reserved. Unauthorized use, distribution or duplication |
| is prohibited. This product is subject to U.S. laws governing |
| export and re-export. For full Legal Notice, see documentation. |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| Job Information at Start of Run |
+--------------------------------------------------------------------+
Run mode: parallel run (MPI)
Job started: Fri Nov 18 00:16:55 2016
+--------------------------------------------------------------------+
| License Information |
+--------------------------------------------------------------------+
License Cap: ANSYS CFX Solver (> 512K Nodes)
License Cap: Parallel
License ID: WorkstationZ800-Workstation-6064-011443
+--------------------------------------------------------------------+
| Memory Allocated for Run (Actual usage may be less) |
+--------------------------------------------------------------------+
Allocated storage in: Mwords
Mbytes
Partition | Real | Integer | Character | Logical | Double
----------+------------+------------+-----------+----------+----------
Minimum | 70.31 | 27.63 | 7.27 | 0.12 | 0.01
( 5) | 536.40 | 105.40 | 6.93 | 0.11 | 0.06
----------+------------+------------+-----------+----------+----------
Maximum | 71.41 | 27.87 | 7.27 | 0.12 | 0.01
( 2) | 544.79 | 106.31 | 6.93 | 0.11 | 0.06
----------+------------+------------+-----------+----------+----------
Average | 70.71 | 27.71 | 7.27 | 0.12 | 0.01
| 539.46 | 105.70 | 6.93 | 0.11 | 0.06
----------+------------+------------+-----------+----------+----------
Total | 848.50 | 332.52 | 87.24 | 1.44 | 0.10
| 6473.54 | 1268.46 | 83.20 | 1.37 | 0.73
----------+------------+------------+-----------+----------+----------
+--------------------------------------------------------------------+
| Host Memory Information (Mbytes) |
+--------------------------------------------------------------------+
| Host | Npart | System | Allocated | % |
+------------------------+-------+-------------+-------------+-------+
| WORKSTATIONZ800 | 12 | 28655.23 | 7827.30 | 27.32 |
+------------------------+-------+-------------+-------------+-------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
| DRILL | 47.9 ok | 8 ok | 5 OK |
| Global | 47.9 ok | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
| DRILL | 0 <1 100 | 0 <1 100 | 0 0 100 |
| Global | 0 <1 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
Domain Name : PEEK
Total Number of Nodes = 1010492
Total Number of Elements = 985005
Total Number of Prisms = 8586
Total Number of Hexahedrons = 976419
Total Number of Faces = 58508
Domain Name : DRILL
Total Number of Nodes = 107169
Total Number of Elements = 536794
Total Number of Tetrahedrons = 536794
Total Number of Faces = 67644
Global Statistics :
Global Number of Nodes = 1117661
Global Number of Elements = 1521799
Total Number of Tetrahedrons = 536794
Total Number of Prisms = 8586
Total Number of Hexahedrons = 976419
Global Number of Faces = 126152
+--------------------------------------------------------------------+
| Buoyancy Reference Information |
+--------------------------------------------------------------------+
Domain Group: PEEK
Buoyancy has been activated. The absolute pressure will include
hydrostatic pressure contribution, using the following reference
coordinates: (-9.89640E-09, 3.13825E-10, 1.05000E-01).
+--------------------------------------------------------------------+
| Initial Conditions Supplied by Fields in the Input Files |
+--------------------------------------------------------------------+
Domain Name : PEEK
Mesh Coordinates
+--------------------------------------------------------------------+
| Average Scale Information |
+--------------------------------------------------------------------+
Domain Name : PEEK
Global Length = 1.4446E-02
Minimum Extent = 9.1231E-03
Maximum Extent = 1.1800E-01
Density = 1.3100E+03
Dynamic Viscosity = 3.5000E+02
Velocity = 0.0000E+00
Domain Name : DRILL
Global Length = 1.0923E-02
Minimum Extent = 5.4999E-03
Maximum Extent = 1.0000E-01
+--------------------------------------------------------------------+
| Checking for Isolated Fluid Regions |
+--------------------------------------------------------------------+
No isolated fluid regions were found.
+--------------------------------------------------------------------+
| The Equations Solved in This Calculation |
+--------------------------------------------------------------------+
Equations are given two labels: the individual name and a combined
name used for combining residuals together. Residuals for multidomain
problems are combined provided the domains are connected together and
have the same domain type (solid or fluid/porous). If there are
multiple groups of the same domain type, then the group residual is
identified by the name of the first domain in the connected group.
The individual and combined equation names are given below.
Subsystem : Mesh Displacement
X-Disp-PEEK --> X-Disp
Y-Disp-PEEK --> Y-Disp
Z-Disp-PEEK --> Z-Disp
Subsystem : Wall Scale
Wallscale-PEEK --> Wallscale
Subsystem : Momentum and Mass
U-Mom-PEEK --> U-Mom
V-Mom-PEEK --> V-Mom
W-Mom-PEEK --> W-Mom
P-Mass-PEEK --> P-Mass
Subsystem : TurbKE and TurbFreq
K-TurbKE-PEEK --> K-TurbKE
O-TurbFreq-PEEK --> O-TurbFreq
CFD Solver started: Fri Nov 18 00:17:23 2016
+--------------------------------------------------------------------+
| Convergence History |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| Writing transient file 0_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 0.00 | 0.00 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 1 SIMULATION TIME = 5.0000E-02 CPU SECONDS = 4.690E+02
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.00 | 7.7E-04 | 2.9E-03 | 31.6 8.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.31 | 2.4E-04 | 7.7E-03 | 18.5 7.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.31 | 7.4E-05 | 2.2E-03 | 22.9 7.3E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 8.148E+02
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.00 | 1.7E-04 | 5.8E-04 | 9.3E-05 OK|
| V-Mom | 0.00 | 1.6E-04 | 5.8E-04 | 9.6E-05 OK|
| W-Mom | 0.00 | 4.6E-08 | 1.7E-06 | 2.0E+00 F |
| P-Mass | 0.00 | 4.3E-06 | 1.1E-04 | 43.0 1.8E-01 ok|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.00 | 4.6E-09 | 1.9E-07 | 27.2 9.6E-02 OK|
| O-TurbFreq | 0.00 | 1.3E-02 | 1.0E+00 | 12.3 2.2E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 1.341E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.16 | 2.7E-05 | 6.7E-04 | 7.0E-02 OK|
| V-Mom | 0.16 | 2.7E-05 | 6.2E-04 | 6.9E-02 OK|
| W-Mom |99.99 | 1.1E-04 | 2.9E-03 | 6.6E-03 OK|
| P-Mass |78.48 | 3.4E-04 | 1.8E-02 | 8.6 4.6E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE |99.99 | 7.3E-01 | 1.4E+00 | 5.4 1.3E-03 OK|
| O-TurbFreq | 0.79 | 1.0E-02 | 3.6E-01 | 12.3 3.2E-06 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 1.719E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.56 | 1.5E-05 | 3.8E-04 | 5.2E-02 OK|
| V-Mom | 0.55 | 1.5E-05 | 3.8E-04 | 5.5E-02 OK|
| W-Mom | 0.33 | 3.6E-05 | 7.6E-04 | 1.9E-02 OK|
| P-Mass | 0.36 | 1.2E-04 | 5.4E-03 | 12.4 9.1E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.23 | 1.7E-01 | 2.3E+00 | 5.4 5.1E-04 OK|
| O-TurbFreq | 0.36 | 3.6E-03 | 1.3E-01 | 12.3 3.0E-05 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 2.106E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.38 | 5.7E-06 | 1.2E-04 | 1.2E-01 ok|
| V-Mom | 0.38 | 5.6E-06 | 1.2E-04 | 1.2E-01 ok|
| W-Mom | 0.23 | 8.5E-06 | 1.8E-04 | 6.7E-02 OK|
| P-Mass | 0.60 | 7.2E-05 | 5.7E-03 | 12.4 9.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.98 | 1.6E-01 | 8.7E-01 | 5.4 4.0E-04 OK|
| O-TurbFreq | 0.30 | 1.1E-03 | 4.1E-02 | 12.3 1.9E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 1_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 112.10 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 2 SIMULATION TIME = 1.0000E-01 CPU SECONDS = 2.667E+03
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.04 | 2.7E-05 | 6.5E-04 | 22.9 7.6E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 2.928E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 1.72 | 2.9E-04 | 3.0E-03 | 2.6E-03 OK|
| V-Mom | 1.81 | 2.9E-04 | 3.6E-03 | 2.6E-03 OK|
| W-Mom |99.99 | 3.3E-04 | 2.7E-03 | 6.8E-03 OK|
| P-Mass |99.99 | 4.5E-04 | 7.0E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE |99.99 | 1.6E-01 | 8.7E-01 | 5.4 9.1E-04 OK|
| O-TurbFreq | 0.02 | 2.8E-04 | 1.4E-02 | 12.3 9.1E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 3.334E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.07 | 2.2E-05 | 5.2E-04 | 2.3E-01 ok|
| V-Mom | 0.08 | 2.2E-05 | 5.4E-04 | 2.2E-01 ok|
| W-Mom | 0.06 | 2.1E-05 | 6.6E-04 | 7.3E-01 ok|
| P-Mass | 1.35 | 6.1E-04 | 8.4E-03 | 4.8 3.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.3E-03 OK|
| O-TurbFreq | 0.22 | 6.2E-05 | 3.6E-03 | 12.3 4.6E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 3.713E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.59 | 1.3E-05 | 2.5E-04 | 2.2E-01 ok|
| V-Mom | 0.58 | 1.3E-05 | 2.9E-04 | 2.0E-01 ok|
| W-Mom | 0.92 | 1.9E-05 | 2.1E-04 | 4.9E-01 ok|
| P-Mass | 0.41 | 2.5E-04 | 3.2E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.19 | 1.2E-05 | 7.0E-04 | 12.3 1.8E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 4.091E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.57 | 7.4E-06 | 1.5E-04 | 1.4E-01 ok|
| V-Mom | 0.57 | 7.2E-06 | 1.6E-04 | 1.3E-01 ok|
| W-Mom | 0.79 | 1.5E-05 | 1.8E-04 | 1.6E-01 ok|
| P-Mass | 0.45 | 1.1E-04 | 1.7E-03 | 4.8 6.2E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.18 | 2.2E-06 | 1.7E-04 | 12.3 4.2E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 5 CPU SECONDS = 4.469E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 4.3E-06 | 8.9E-05 | 1.6E-01 ok|
| V-Mom | 0.58 | 4.2E-06 | 9.0E-05 | 1.6E-01 ok|
| W-Mom | 0.56 | 8.4E-06 | 1.3E-04 | 1.4E-01 ok|
| P-Mass | 0.47 | 5.2E-05 | 1.5E-03 | 4.8 5.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.22 | 4.8E-07 | 4.4E-05 | 12.3 5.4E-02 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 2_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 93.38 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 3 SIMULATION TIME = 1.5000E-01 CPU SECONDS = 5.086E+03
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.40 | 1.1E-05 | 2.6E-04 | 22.9 7.5E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 5.346E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.82 | 2.4E-04 | 2.4E-03 | 2.3E-03 OK|
| V-Mom | 0.81 | 2.4E-04 | 2.2E-03 | 2.4E-03 OK|
| W-Mom | 0.76 | 2.5E-04 | 2.1E-03 | 6.7E-03 OK|
| P-Mass | 0.94 | 4.3E-04 | 6.3E-03 | 4.8 6.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.00 | 2.0E-07 | 2.2E-05 | 12.3 2.4E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 5.752E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.07 | 1.7E-05 | 3.7E-04 | 2.3E-01 ok|
| V-Mom | 0.07 | 1.7E-05 | 4.5E-04 | 2.2E-01 ok|
| W-Mom | 0.06 | 1.6E-05 | 4.9E-04 | 7.3E-01 ok|
| P-Mass | 1.38 | 5.9E-04 | 7.2E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 3.47 | 7.0E-07 | 1.1E-04 | 12.3 1.4E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 6.132E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 1.0E-05 | 2.0E-04 | 2.2E-01 ok|
| V-Mom | 0.59 | 9.9E-06 | 1.9E-04 | 2.0E-01 ok|
| W-Mom | 0.92 | 1.4E-05 | 1.7E-04 | 4.9E-01 ok|
| P-Mass | 0.41 | 2.4E-04 | 3.1E-03 | 4.8 6.1E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.10 | 6.6E-08 | 8.5E-06 | 12.3 1.9E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 6.511E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 5.8E-06 | 1.1E-04 | 1.4E-01 ok|
| V-Mom | 0.57 | 5.7E-06 | 1.2E-04 | 1.3E-01 ok|
| W-Mom | 0.80 | 1.2E-05 | 1.3E-04 | 1.6E-01 ok|
| P-Mass | 0.44 | 1.1E-04 | 1.9E-03 | 4.8 6.0E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.49 | 3.2E-08 | 4.4E-06 | 12.3 1.7E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 5 CPU SECONDS = 6.889E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 3.4E-06 | 6.6E-05 | 1.4E-01 ok|
| V-Mom | 0.58 | 3.3E-06 | 7.0E-05 | 1.4E-01 ok|
| W-Mom | 0.55 | 6.4E-06 | 9.6E-05 | 1.4E-01 ok|
| P-Mass | 0.46 | 4.9E-05 | 1.5E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.50 | 1.6E-08 | 2.2E-06 | 12.3 1.7E-03 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 3_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 92.31 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 4 SIMULATION TIME = 2.0000E-01 CPU SECONDS = 7.510E+03
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.41 | 4.4E-06 | 1.2E-04 | 22.9 7.3E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 7.774E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.82 | 2.0E-04 | 1.8E-03 | 2.3E-03 OK|
| V-Mom | 0.83 | 2.0E-04 | 2.0E-03 | 2.3E-03 OK|
| W-Mom | 0.81 | 2.1E-04 | 1.7E-03 | 6.6E-03 OK|
| P-Mass | 1.00 | 4.3E-04 | 6.4E-03 | 4.8 6.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.04 | 8.2E-09 | 1.1E-06 | 12.3 1.7E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 8.182E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.07 | 1.4E-05 | 3.0E-04 | 2.3E-01 ok|
| V-Mom | 0.07 | 1.4E-05 | 3.4E-04 | 2.2E-01 ok|
| W-Mom | 0.06 | 1.3E-05 | 1.7E-04 | 7.3E-01 ok|
| P-Mass | 1.39 | 5.9E-04 | 5.7E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq |39.45 | 3.2E-07 | 5.0E-05 | 12.3 6.8E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 8.566E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 8.2E-06 | 1.5E-04 | 2.2E-01 ok|
| V-Mom | 0.59 | 8.1E-06 | 1.6E-04 | 2.0E-01 ok|
| W-Mom | 0.91 | 1.1E-05 | 1.0E-04 | 4.9E-01 ok|
| P-Mass | 0.40 | 2.4E-04 | 3.2E-03 | 4.8 6.1E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.13 | 4.3E-08 | 5.4E-06 | 12.3 5.5E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 8.948E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 4.7E-06 | 9.1E-05 | 1.4E-01 ok|
| V-Mom | 0.57 | 4.6E-06 | 1.1E-04 | 1.3E-01 ok|
| W-Mom | 0.80 | 9.2E-06 | 1.1E-04 | 1.5E-01 ok|
| P-Mass | 0.44 | 1.1E-04 | 1.7E-03 | 4.8 6.0E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.44 | 1.9E-08 | 2.2E-06 | 12.3 4.2E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 5 CPU SECONDS = 9.329E+03
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 2.7E-06 | 5.8E-05 | 1.4E-01 ok|
| V-Mom | 0.58 | 2.7E-06 | 5.7E-05 | 1.3E-01 ok|
| W-Mom | 0.55 | 5.1E-06 | 8.0E-05 | 1.5E-01 ok|
| P-Mass | 0.46 | 4.9E-05 | 9.7E-04 | 4.8 5.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.48 | 9.2E-09 | 1.1E-06 | 12.3 4.3E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 4_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 90.77 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 5 SIMULATION TIME = 2.5000E-01 CPU SECONDS = 9.957E+03
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.41 | 1.8E-06 | 5.2E-05 | 18.5 9.9E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 1.022E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.84 | 1.7E-04 | 1.7E-03 | 2.3E-03 OK|
| V-Mom | 0.83 | 1.6E-04 | 1.5E-03 | 2.3E-03 OK|
| W-Mom | 0.80 | 1.6E-04 | 1.3E-03 | 6.8E-03 OK|
| P-Mass | 0.97 | 4.1E-04 | 6.4E-03 | 4.8 6.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.55 | 4.5E-09 | 5.7E-07 | 12.3 5.4E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 1.063E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.07 | 1.1E-05 | 2.3E-04 | 2.3E-01 ok|
| V-Mom | 0.07 | 1.1E-05 | 2.5E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 1.0E-05 | 4.3E-04 | 7.0E-01 ok|
| P-Mass | 1.37 | 5.7E-04 | 5.6E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq |29.85 | 1.4E-07 | 2.1E-05 | 12.3 6.9E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 1.100E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 6.6E-06 | 1.2E-04 | 2.2E-01 ok|
| V-Mom | 0.59 | 6.5E-06 | 1.2E-04 | 2.1E-01 ok|
| W-Mom | 0.88 | 9.1E-06 | 1.1E-04 | 4.9E-01 ok|
| P-Mass | 0.40 | 2.3E-04 | 3.1E-03 | 4.8 6.1E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.16 | 2.2E-08 | 3.1E-06 | 12.3 7.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 1.138E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 3.8E-06 | 7.0E-05 | 1.5E-01 ok|
| V-Mom | 0.58 | 3.7E-06 | 8.0E-05 | 1.3E-01 ok|
| W-Mom | 0.80 | 7.2E-06 | 8.5E-05 | 1.5E-01 ok|
| P-Mass | 0.43 | 9.9E-05 | 1.5E-03 | 4.8 5.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.46 | 1.0E-08 | 1.4E-06 | 12.3 1.5E-03 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 5_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 90.06 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 6 SIMULATION TIME = 3.0000E-01 CPU SECONDS = 1.200E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.42 | 7.7E-07 | 2.2E-05 | 22.9 7.6E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 1.226E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.88 | 1.5E-04 | 1.3E-03 | 2.3E-03 OK|
| V-Mom | 0.89 | 1.5E-04 | 1.6E-03 | 2.3E-03 OK|
| W-Mom | 0.87 | 1.4E-04 | 1.1E-03 | 7.4E-03 OK|
| P-Mass | 1.02 | 4.2E-04 | 6.6E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.84 | 8.3E-09 | 6.9E-07 | 12.3 5.7E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 1.266E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.07 | 9.6E-06 | 2.0E-04 | 2.4E-01 ok|
| V-Mom | 0.07 | 9.6E-06 | 2.1E-04 | 2.3E-01 ok|
| W-Mom | 0.07 | 9.4E-06 | 3.1E-04 | 6.7E-01 ok|
| P-Mass | 1.33 | 5.6E-04 | 8.3E-03 | 4.8 3.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 7.92 | 6.6E-08 | 1.0E-05 | 12.3 1.8E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 1.303E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 5.8E-06 | 1.1E-04 | 2.3E-01 ok|
| V-Mom | 0.59 | 5.7E-06 | 1.2E-04 | 2.1E-01 ok|
| W-Mom | 0.83 | 7.8E-06 | 1.0E-04 | 4.8E-01 ok|
| P-Mass | 0.40 | 2.2E-04 | 3.0E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.00 | 1.6E-01 | 8.7E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 0.37 | 2.5E-08 | 2.0E-06 | 12.3 3.3E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 1.341E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.58 | 3.4E-06 | 6.1E-05 | 1.5E-01 ok|
| V-Mom | 0.58 | 3.3E-06 | 7.5E-05 | 1.4E-01 ok|
| W-Mom | 0.79 | 6.2E-06 | 7.1E-05 | 1.5E-01 ok|
| P-Mass | 0.43 | 9.6E-05 | 1.5E-03 | 4.8 5.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.98 | 1.6E-01 | 8.5E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.49 | 3.7E-08 | 3.8E-06 | 12.3 2.2E-03 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 6_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.68 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 7 SIMULATION TIME = 3.5000E-01 CPU SECONDS = 1.404E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 3.3E-07 | 1.0E-05 | 22.9 7.1E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 1.429E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.91 | 1.3E-04 | 1.6E-03 | 2.1E-03 OK|
| V-Mom | 0.90 | 1.3E-04 | 1.2E-03 | 2.2E-03 OK|
| W-Mom | 0.90 | 1.3E-04 | 1.0E-03 | 6.7E-03 OK|
| P-Mass | 0.97 | 4.1E-04 | 6.3E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.56 | 9.1E-02 | 4.9E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 5.43 | 4.5E-08 | 5.9E-06 | 12.3 1.9E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 1.469E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 8.6E-06 | 1.8E-04 | 2.3E-01 ok|
| V-Mom | 0.07 | 8.6E-06 | 2.1E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 8.0E-06 | 2.5E-04 | 6.9E-01 ok|
| P-Mass | 1.33 | 5.5E-04 | 6.8E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 4.5E-02 | 2.4E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.25 | 5.6E-08 | 4.7E-06 | 12.3 1.3E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 1.507E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 5.2E-06 | 1.0E-04 | 2.3E-01 ok|
| V-Mom | 0.59 | 5.1E-06 | 9.4E-05 | 2.2E-01 ok|
| W-Mom | 0.86 | 6.9E-06 | 8.4E-05 | 4.8E-01 ok|
| P-Mass | 0.40 | 2.2E-04 | 2.8E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 2.3E-02 | 1.2E-01 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.24 | 7.0E-08 | 8.7E-06 | 12.3 8.9E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 1.544E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.59 | 3.0E-06 | 5.5E-05 | 1.6E-01 ok|
| V-Mom | 0.58 | 3.0E-06 | 6.1E-05 | 1.4E-01 ok|
| W-Mom | 0.80 | 5.5E-06 | 6.3E-05 | 1.5E-01 ok|
| P-Mass | 0.43 | 9.2E-05 | 1.7E-03 | 4.8 5.6E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.1E-02 | 6.0E-02 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.05 | 7.3E-08 | 7.4E-06 | 12.3 8.9E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 7_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.50 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 8 SIMULATION TIME = 4.0000E-01 CPU SECONDS = 1.606E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.42 | 1.4E-07 | 4.4E-06 | 18.5 9.5E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 1.631E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.93 | 1.2E-04 | 1.1E-03 | 2.1E-03 OK|
| V-Mom | 0.94 | 1.2E-04 | 1.5E-03 | 2.1E-03 OK|
| W-Mom | 0.92 | 1.2E-04 | 1.0E-03 | 6.6E-03 OK|
| P-Mass | 0.99 | 4.1E-04 | 6.7E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 5.6E-03 | 3.0E-02 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.76 | 8.0E-08 | 1.1E-05 | 12.3 8.6E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 1.671E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 7.9E-06 | 1.7E-04 | 2.3E-01 ok|
| V-Mom | 0.06 | 7.9E-06 | 1.9E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 7.3E-06 | 9.3E-05 | 6.9E-01 ok|
| P-Mass | 1.33 | 5.4E-04 | 5.4E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 2.8E-03 | 1.5E-02 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.15 | 9.1E-08 | 9.4E-06 | 12.3 8.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 1.708E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 4.8E-06 | 8.5E-05 | 2.3E-01 ok|
| V-Mom | 0.60 | 4.7E-06 | 8.8E-05 | 2.2E-01 ok|
| W-Mom | 0.85 | 6.3E-06 | 5.8E-05 | 4.9E-01 ok|
| P-Mass | 0.39 | 2.1E-04 | 2.7E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.4E-03 | 7.6E-03 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.10 | 1.0E-07 | 8.9E-06 | 12.3 7.4E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 1.747E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.59 | 2.8E-06 | 5.0E-05 | 1.6E-01 ok|
| V-Mom | 0.58 | 2.8E-06 | 6.0E-05 | 1.5E-01 ok|
| W-Mom | 0.80 | 5.0E-06 | 5.8E-05 | 1.5E-01 ok|
| P-Mass | 0.43 | 9.2E-05 | 1.5E-03 | 4.8 5.6E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 7.1E-04 | 3.8E-03 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.11 | 1.1E-07 | 9.6E-06 | 12.3 6.8E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 8_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.36 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 9 SIMULATION TIME = 4.5000E-01 CPU SECONDS = 1.809E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 6.0E-08 | 1.9E-06 | 22.9 7.2E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 1.834E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.95 | 1.2E-04 | 1.4E-03 | 2.2E-03 OK|
| V-Mom | 0.94 | 1.2E-04 | 1.0E-03 | 2.2E-03 OK|
| W-Mom | 0.92 | 1.1E-04 | 9.6E-04 | 6.9E-03 OK|
| P-Mass | 0.98 | 4.0E-04 | 6.6E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 3.5E-04 | 1.9E-03 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.55 | 1.2E-07 | 1.1E-05 | 12.3 6.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 1.875E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 7.3E-06 | 1.6E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 7.3E-06 | 1.7E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 6.9E-06 | 3.1E-04 | 6.6E-01 ok|
| P-Mass | 1.32 | 5.3E-04 | 5.5E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.8E-04 | 9.5E-04 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.09 | 1.3E-07 | 1.2E-05 | 12.3 6.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 1.912E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 4.4E-06 | 8.1E-05 | 2.3E-01 ok|
| V-Mom | 0.60 | 4.4E-06 | 8.0E-05 | 2.2E-01 ok|
| W-Mom | 0.83 | 5.7E-06 | 8.4E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 2.1E-04 | 3.1E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 8.8E-05 | 4.7E-04 | 5.4 1.5E-03 OK|
| O-TurbFreq | 1.08 | 1.5E-07 | 1.2E-05 | 12.3 5.8E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 1.950E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.59 | 2.6E-06 | 4.9E-05 | 1.6E-01 ok|
| V-Mom | 0.59 | 2.6E-06 | 5.0E-05 | 1.5E-01 ok|
| W-Mom | 0.79 | 4.6E-06 | 5.2E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.8E-05 | 1.3E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 4.4E-05 | 2.4E-04 | 5.4 1.6E-03 OK|
| O-TurbFreq | 1.07 | 1.6E-07 | 1.3E-05 | 12.3 5.7E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 9_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.28 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 10 SIMULATION TIME = 5.0000E-01 CPU SECONDS = 2.011E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 2.6E-08 | 8.6E-07 | 18.5 9.5E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 2.036E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.95 | 1.1E-04 | 9.8E-04 | 2.2E-03 OK|
| V-Mom | 0.96 | 1.1E-04 | 1.4E-03 | 2.3E-03 OK|
| W-Mom | 0.94 | 1.0E-04 | 9.5E-04 | 7.2E-03 OK|
| P-Mass | 0.99 | 4.0E-04 | 6.9E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 2.2E-05 | 1.2E-04 | 5.4 1.7E-03 OK|
| O-TurbFreq | 1.33 | 1.6E-07 | 1.3E-05 | 12.3 5.7E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 2.076E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.9E-06 | 1.5E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 6.9E-06 | 1.8E-04 | 2.3E-01 ok|
| W-Mom | 0.07 | 6.8E-06 | 2.6E-04 | 6.4E-01 ok|
| P-Mass | 1.32 | 5.2E-04 | 9.2E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.1E-05 | 5.9E-05 | 5.4 1.8E-03 OK|
| O-TurbFreq | 1.06 | 1.7E-07 | 1.4E-05 | 12.3 5.5E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 2.114E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 4.2E-06 | 9.1E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 4.1E-06 | 9.6E-05 | 2.2E-01 ok|
| W-Mom | 0.79 | 5.4E-06 | 8.6E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 2.0E-04 | 2.6E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 5.5E-06 | 3.0E-05 | 5.4 2.0E-03 OK|
| O-TurbFreq | 1.05 | 1.8E-07 | 1.4E-05 | 12.3 5.5E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 2.152E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.59 | 2.5E-06 | 4.2E-05 | 1.7E-01 ok|
| V-Mom | 0.59 | 2.4E-06 | 5.0E-05 | 1.6E-01 ok|
| W-Mom | 0.79 | 4.3E-06 | 4.9E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.6E-05 | 1.3E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 2.8E-06 | 1.5E-05 | 5.4 2.2E-03 OK|
| O-TurbFreq | 1.05 | 1.9E-07 | 1.5E-05 | 12.3 5.5E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 10_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.21 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 11 SIMULATION TIME = 5.5000E-01 CPU SECONDS = 2.215E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 1.1E-08 | 3.8E-07 | 22.9 7.2E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 2.240E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.97 | 1.1E-04 | 1.4E-03 | 2.0E-03 OK|
| V-Mom | 0.96 | 1.1E-04 | 9.5E-04 | 2.1E-03 OK|
| W-Mom | 0.96 | 9.8E-05 | 9.0E-04 | 6.4E-03 OK|
| P-Mass | 0.98 | 3.9E-04 | 6.9E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 1.4E-06 | 7.4E-06 | 5.4 2.6E-03 OK|
| O-TurbFreq | 1.22 | 2.0E-07 | 1.5E-05 | 12.3 5.7E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 2.281E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.6E-06 | 1.5E-04 | 2.3E-01 ok|
| V-Mom | 0.06 | 6.6E-06 | 1.6E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 6.1E-06 | 1.8E-04 | 6.7E-01 ok|
| P-Mass | 1.32 | 5.1E-04 | 6.0E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 6.9E-07 | 3.7E-06 | 5.4 3.0E-03 OK|
| O-TurbFreq | 1.04 | 2.1E-07 | 1.6E-05 | 12.3 6.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 2.320E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 4.0E-06 | 7.5E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 4.0E-06 | 7.3E-05 | 2.3E-01 ok|
| W-Mom | 0.83 | 5.1E-06 | 6.0E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 2.0E-04 | 2.5E-03 | 4.8 5.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 3.5E-07 | 1.8E-06 | 5.4 3.7E-03 OK|
| O-TurbFreq | 1.04 | 2.2E-07 | 1.7E-05 | 12.3 6.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 2.357E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.4E-06 | 4.3E-05 | 1.7E-01 ok|
| V-Mom | 0.59 | 2.3E-06 | 4.5E-05 | 1.6E-01 ok|
| W-Mom | 0.80 | 4.1E-06 | 4.5E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.4E-05 | 1.5E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.7E-07 | 9.2E-07 | 5.4 4.6E-03 OK|
| O-TurbFreq | 1.04 | 2.3E-07 | 1.8E-05 | 12.3 6.6E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 11_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.17 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 12 SIMULATION TIME = 6.0000E-01 CPU SECONDS = 2.419E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 4.8E-09 | 1.7E-07 | 18.5 9.3E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 2.443E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.97 | 1.0E-04 | 9.5E-04 | 2.1E-03 OK|
| V-Mom | 0.98 | 1.0E-04 | 1.3E-03 | 2.1E-03 OK|
| W-Mom | 0.97 | 9.5E-05 | 9.3E-04 | 6.3E-03 OK|
| P-Mass | 1.00 | 3.9E-04 | 7.1E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 8.6E-08 | 4.6E-07 | 5.4 5.7E-03 OK|
| O-TurbFreq | 1.18 | 2.4E-07 | 2.0E-05 | 12.3 6.6E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 2.484E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.4E-06 | 1.5E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 6.4E-06 | 1.6E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.9E-06 | 7.2E-05 | 6.7E-01 ok|
| P-Mass | 1.32 | 5.1E-04 | 5.6E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 4.3E-08 | 2.3E-07 | 5.4 7.2E-03 OK|
| O-TurbFreq | 1.04 | 2.5E-07 | 2.0E-05 | 12.3 7.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 2.521E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.9E-06 | 7.4E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.9E-06 | 7.8E-05 | 2.3E-01 ok|
| W-Mom | 0.83 | 4.9E-06 | 4.6E-05 | 4.9E-01 ok|
| P-Mass | 0.39 | 2.0E-04 | 2.4E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 2.2E-08 | 1.2E-07 | 5.4 9.5E-03 OK|
| O-TurbFreq | 1.04 | 2.6E-07 | 2.0E-05 | 12.3 7.1E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 2.559E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.3E-06 | 4.0E-05 | 1.7E-01 ok|
| V-Mom | 0.59 | 2.3E-06 | 5.1E-05 | 1.6E-01 ok|
| W-Mom | 0.80 | 3.9E-06 | 4.6E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.4E-05 | 1.4E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.1E-08 | 5.8E-08 | 5.4 1.2E-02 OK|
| O-TurbFreq | 1.04 | 2.7E-07 | 2.2E-05 | 12.3 7.9E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 12_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.15 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 13 SIMULATION TIME = 6.5000E-01 CPU SECONDS = 2.621E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 2.1E-09 | 7.7E-08 | 18.5 9.9E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 2.645E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 1.0E-04 | 1.3E-03 | 2.1E-03 OK|
| V-Mom | 0.97 | 1.0E-04 | 9.6E-04 | 2.1E-03 OK|
| W-Mom | 0.97 | 9.3E-05 | 8.7E-04 | 6.7E-03 OK|
| P-Mass | 0.99 | 3.8E-04 | 6.9E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 5.4E-09 | 2.9E-08 | 5.4 1.4E-02 OK|
| O-TurbFreq | 1.17 | 2.8E-07 | 2.3E-05 | 12.3 8.5E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 2.685E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.2E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 6.2E-06 | 1.5E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.9E-06 | 2.8E-04 | 6.5E-01 ok|
| P-Mass | 1.32 | 5.1E-04 | 5.5E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 2.7E-09 | 1.4E-08 | 5.4 1.6E-02 OK|
| O-TurbFreq | 1.04 | 2.9E-07 | 2.3E-05 | 12.3 9.8E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 2.723E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.8E-06 | 7.4E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.7E-06 | 6.8E-05 | 2.3E-01 ok|
| W-Mom | 0.81 | 4.8E-06 | 7.6E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 2.0E-04 | 3.1E-03 | 4.8 5.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.4E-09 | 7.2E-09 | 5.4 2.4E-02 OK|
| O-TurbFreq | 1.02 | 2.9E-07 | 2.6E-05 | 12.3 1.5E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 2.761E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.3E-06 | 4.5E-05 | 1.8E-01 ok|
| V-Mom | 0.59 | 2.2E-06 | 4.2E-05 | 1.7E-01 ok|
| W-Mom | 0.79 | 3.8E-06 | 4.7E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.3E-05 | 1.2E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 6.8E-10 | 3.6E-09 | 5.4 3.2E-02 OK|
| O-TurbFreq | 1.03 | 3.0E-07 | 2.5E-05 | 12.3 2.3E-03 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 13_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.13 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 14 SIMULATION TIME = 7.0000E-01 CPU SECONDS = 2.822E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.44 | 9.1E-10 | 3.4E-08 | 22.9 7.4E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 2.847E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.98 | 1.0E-04 | 9.3E-04 | 2.2E-03 OK|
| V-Mom | 0.99 | 1.0E-04 | 1.3E-03 | 2.3E-03 OK|
| W-Mom | 0.98 | 9.1E-05 | 9.0E-04 | 7.2E-03 OK|
| P-Mass | 1.00 | 3.8E-04 | 7.2E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.06 | 3.4E-10 | 1.8E-09 | 5.4 1.6E-02 OK|
| O-TurbFreq | 1.10 | 3.0E-07 | 2.8E-05 | 12.3 2.8E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 2.887E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.1E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 6.1E-06 | 1.7E-04 | 2.3E-01 ok|
| W-Mom | 0.07 | 6.1E-06 | 2.5E-04 | 6.2E-01 ok|
| P-Mass | 1.31 | 5.0E-04 | 9.6E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.50 | 1.7E-10 | 9.0E-10 | 5.4 2.4E-02 OK|
| O-TurbFreq | 1.02 | 3.1E-07 | 2.6E-05 | 12.3 2.8E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 2.925E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.7E-06 | 8.6E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.7E-06 | 9.1E-05 | 2.3E-01 ok|
| W-Mom | 0.77 | 4.7E-06 | 8.1E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 2.0E-04 | 2.5E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.53 | 9.1E-11 | 1.3E-09 | 9.7 4.9E-02 OK|
| O-TurbFreq | 1.02 | 3.1E-07 | 2.8E-05 | 12.3 2.7E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 2.963E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 4.0E-05 | 1.8E-01 ok|
| V-Mom | 0.59 | 2.2E-06 | 4.5E-05 | 1.7E-01 ok|
| W-Mom | 0.79 | 3.7E-06 | 4.6E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.2E-05 | 1.2E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.52 | 4.7E-11 | 8.3E-10 | 9.7 7.0E-02 OK|
| O-TurbFreq | 1.25 | 3.9E-07 | 3.8E-05 | 12.3 3.2E-03 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 14_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.11 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 15 SIMULATION TIME = 7.5000E-01 CPU SECONDS = 3.026E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.44 | 4.0E-10 | 1.5E-08 | 18.5 9.5E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 3.050E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 1.0E-04 | 1.3E-03 | 2.0E-03 OK|
| V-Mom | 0.98 | 9.9E-05 | 9.2E-04 | 2.1E-03 OK|
| W-Mom | 0.98 | 8.9E-05 | 8.6E-04 | 6.3E-03 OK|
| P-Mass | 0.99 | 3.8E-04 | 7.1E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.10 | 3.3E-11 | 9.6E-10 | 9.7 9.8E-02 OK|
| O-TurbFreq | 1.32 | 4.0E-07 | 3.0E-05 | 12.3 1.6E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 3.091E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.0E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 6.0E-06 | 1.5E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.6E-06 | 1.6E-04 | 6.6E-01 ok|
| P-Mass | 1.32 | 5.0E-04 | 5.7E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.65 | 2.1E-11 | 7.2E-10 | 14.1 6.5E-02 OK|
| O-TurbFreq | 1.51 | 6.0E-07 | 6.0E-05 | 12.3 1.2E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 3.130E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.7E-06 | 7.2E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.6E-06 | 6.9E-05 | 2.3E-01 ok|
| W-Mom | 0.82 | 4.6E-06 | 5.2E-05 | 4.9E-01 ok|
| P-Mass | 0.39 | 1.9E-04 | 2.4E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.22 | 2.6E-11 | 9.8E-10 | 14.1 6.5E-02 OK|
| O-TurbFreq | 1.58 | 9.6E-07 | 1.0E-04 | 12.3 1.5E-03 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 3.169E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 4.1E-05 | 1.8E-01 ok|
| V-Mom | 0.60 | 2.2E-06 | 4.1E-05 | 1.7E-01 ok|
| W-Mom | 0.80 | 3.7E-06 | 4.3E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.1E-05 | 1.4E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.60 | 1.6E-11 | 6.0E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 1.49 | 1.4E-06 | 1.6E-04 | 12.3 1.3E-03 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 15_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.10 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 16 SIMULATION TIME = 8.0000E-01 CPU SECONDS = 3.232E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.43 | 1.7E-10 | 6.7E-09 | 18.5 1.0E-01 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 3.256E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 9.9E-05 | 9.3E-04 | 2.0E-03 OK|
| V-Mom | 1.00 | 9.9E-05 | 1.3E-03 | 2.0E-03 OK|
| W-Mom | 0.99 | 8.9E-05 | 8.9E-04 | 6.3E-03 OK|
| P-Mass | 1.00 | 3.8E-04 | 7.3E-03 | 4.8 6.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.68 | 2.2E-11 | 8.5E-10 | 14.1 6.7E-02 OK|
| O-TurbFreq | 4.74 | 1.9E-06 | 2.3E-04 | 12.3 8.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 3.298E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 6.0E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 6.0E-06 | 1.5E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.5E-06 | 6.7E-05 | 6.6E-01 ok|
| P-Mass | 1.31 | 5.0E-04 | 5.7E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.57 | 1.3E-11 | 4.8E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 1.15 | 2.2E-06 | 2.8E-04 | 12.3 5.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 3.337E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.7E-06 | 7.1E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.6E-06 | 7.5E-05 | 2.3E-01 ok|
| W-Mom | 0.82 | 4.6E-06 | 4.2E-05 | 4.9E-01 ok|
| P-Mass | 0.39 | 1.9E-04 | 2.3E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.81 | 2.3E-11 | 8.9E-10 | 14.1 6.9E-02 OK|
| O-TurbFreq | 0.93 | 2.0E-06 | 2.7E-04 | 12.3 3.8E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 3.376E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 3.8E-05 | 1.8E-01 ok|
| V-Mom | 0.60 | 2.2E-06 | 4.9E-05 | 1.7E-01 ok|
| W-Mom | 0.80 | 3.6E-06 | 4.5E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.1E-05 | 1.3E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.54 | 1.2E-11 | 4.6E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 0.72 | 1.5E-06 | 2.0E-04 | 12.3 3.2E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 16_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.10 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 17 SIMULATION TIME = 8.5000E-01 CPU SECONDS = 3.439E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.44 | 7.6E-11 | 3.0E-09 | 22.9 7.4E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 3.464E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 1.00 | 1.0E-04 | 1.3E-03 | 2.1E-03 OK|
| V-Mom | 0.99 | 9.8E-05 | 9.4E-04 | 2.1E-03 OK|
| W-Mom | 0.99 | 8.8E-05 | 8.5E-04 | 6.7E-03 OK|
| P-Mass | 1.00 | 3.8E-04 | 7.0E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.91 | 2.0E-11 | 7.8E-10 | 14.1 6.9E-02 OK|
| O-TurbFreq | 0.44 | 8.4E-07 | 1.1E-04 | 12.3 3.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 3.504E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 5.9E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 5.9E-06 | 1.4E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.6E-06 | 2.7E-04 | 6.4E-01 ok|
| P-Mass | 1.31 | 5.0E-04 | 5.5E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.74 | 1.5E-11 | 5.9E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 0.53 | 4.4E-07 | 5.9E-05 | 12.3 3.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 3.543E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.6E-06 | 7.2E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.6E-06 | 6.4E-05 | 2.3E-01 ok|
| W-Mom | 0.80 | 4.5E-06 | 7.4E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 1.9E-04 | 3.1E-03 | 4.8 5.8E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.53 | 2.3E-11 | 8.9E-10 | 14.1 6.8E-02 OK|
| O-TurbFreq | 0.52 | 2.3E-07 | 3.0E-05 | 12.3 2.8E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 3.581E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 4.4E-05 | 1.8E-01 ok|
| V-Mom | 0.60 | 2.1E-06 | 4.1E-05 | 1.7E-01 ok|
| W-Mom | 0.79 | 3.6E-06 | 4.5E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.1E-05 | 1.2E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.59 | 1.4E-11 | 5.2E-10 | 14.1 7.7E-02 OK|
| O-TurbFreq | 0.52 | 1.2E-07 | 1.5E-05 | 12.3 2.7E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 17_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.10 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 18 SIMULATION TIME = 9.0000E-01 CPU SECONDS = 3.645E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.44 | 3.4E-11 | 1.3E-09 | 18.5 9.5E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 3.670E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 9.9E-05 | 9.2E-04 | 2.2E-03 OK|
| V-Mom | 1.00 | 9.8E-05 | 1.3E-03 | 2.3E-03 OK|
| W-Mom | 1.00 | 8.8E-05 | 8.8E-04 | 7.2E-03 OK|
| P-Mass | 1.00 | 3.8E-04 | 7.2E-03 | 4.8 6.3E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.37 | 2.8E-11 | 1.1E-09 | 14.1 6.9E-02 OK|
| O-TurbFreq | 0.07 | 6.2E-08 | 7.4E-06 | 12.3 2.6E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 3.711E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 5.9E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 5.9E-06 | 1.6E-04 | 2.3E-01 ok|
| W-Mom | 0.07 | 5.9E-06 | 2.4E-04 | 6.2E-01 ok|
| P-Mass | 1.31 | 5.0E-04 | 9.7E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.56 | 1.6E-11 | 5.9E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 0.52 | 3.3E-08 | 3.7E-06 | 12.3 2.4E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 3.749E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.6E-06 | 8.5E-05 | 2.5E-01 ok|
| V-Mom | 0.60 | 3.6E-06 | 8.9E-05 | 2.3E-01 ok|
| W-Mom | 0.76 | 4.5E-06 | 8.0E-05 | 4.8E-01 ok|
| P-Mass | 0.39 | 1.9E-04 | 2.5E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.91 | 3.0E-11 | 1.2E-09 | 14.1 6.9E-02 OK|
| O-TurbFreq | 0.52 | 1.7E-08 | 1.9E-06 | 12.3 2.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 3.787E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 3.9E-05 | 1.8E-01 ok|
| V-Mom | 0.60 | 2.1E-06 | 4.4E-05 | 1.7E-01 ok|
| W-Mom | 0.79 | 3.6E-06 | 4.5E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.1E-05 | 1.2E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.60 | 1.8E-11 | 6.8E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 0.52 | 8.9E-09 | 9.3E-07 | 12.3 2.3E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 18_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.09 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 19 SIMULATION TIME = 9.5000E-01 CPU SECONDS = 3.850E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.44 | 1.5E-11 | 5.8E-10 | 18.5 9.9E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 3.874E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 1.00 | 9.9E-05 | 1.3E-03 | 2.0E-03 OK|
| V-Mom | 0.99 | 9.7E-05 | 9.1E-04 | 2.1E-03 OK|
| W-Mom | 0.99 | 8.7E-05 | 8.4E-04 | 6.3E-03 OK|
| P-Mass | 0.99 | 3.8E-04 | 7.2E-03 | 4.8 6.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.94 | 2.6E-11 | 1.0E-09 | 14.1 6.6E-02 OK|
| O-TurbFreq | 0.07 | 4.7E-09 | 4.6E-07 | 12.3 2.2E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 3.915E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 5.9E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 5.9E-06 | 1.4E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.5E-06 | 1.6E-04 | 6.6E-01 ok|
| P-Mass | 1.31 | 4.9E-04 | 5.6E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.66 | 1.7E-11 | 6.8E-10 | 14.1 7.7E-02 OK|
| O-TurbFreq | 0.52 | 2.4E-09 | 2.3E-07 | 12.3 2.2E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 3.953E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.6E-06 | 7.1E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.5E-06 | 6.8E-05 | 2.3E-01 ok|
| W-Mom | 0.81 | 4.4E-06 | 5.0E-05 | 4.9E-01 ok|
| P-Mass | 0.39 | 1.9E-04 | 2.4E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.43 | 2.5E-11 | 9.6E-10 | 14.1 6.6E-02 OK|
| O-TurbFreq | 0.52 | 1.3E-09 | 1.2E-07 | 12.3 2.3E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 3.991E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 4.1E-05 | 1.8E-01 ok|
| V-Mom | 0.60 | 2.1E-06 | 3.9E-05 | 1.7E-01 ok|
| W-Mom | 0.80 | 3.5E-06 | 4.2E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.0E-05 | 1.3E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.60 | 1.5E-11 | 5.8E-10 | 14.1 7.7E-02 OK|
| O-TurbFreq | 0.52 | 6.5E-10 | 6.5E-08 | 12.3 2.3E-04 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Writing transient file 19_full.trn |
| Name : Transient Results 1 |
| Type : Standard |
| Option : Every Timestep |
+--------------------------------------------------------------------+
======================================================================
| Timestepping Information |
----------------------------------------------------------------------
| Timestep | RMS Courant Number | Max Courant Number |
+----------------------+----------------------+----------------------+
| 5.0000E-02 | 89.09 | 999.99 |
----------------------------------------------------------------------
======================================================================
TIME STEP = 20 SIMULATION TIME = 1.0000E+00 CPU SECONDS = 4.053E+04
----------------------------------------------------------------------
| SOLVING : Mesh Displacement |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| X-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Y-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 0.0E+00 OK|
| Z-Disp | 0.00 | 0.0E+00 | 0.0E+00 | 5.3 0.0E+00 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| PEEK | 60.0 OK | 14 ok | 88 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| PEEK | 0 0 100 | 0 <1 100 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
----------------------------------------------------------------------
| SOLVING : Wall Scale |
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| Wallscale | 0.44 | 6.5E-12 | 2.6E-10 | 22.9 7.3E-02 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 1 CPU SECONDS = 4.078E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 9.8E-05 | 9.2E-04 | 2.0E-03 OK|
| V-Mom | 1.00 | 9.8E-05 | 1.3E-03 | 2.0E-03 OK|
| W-Mom | 1.00 | 8.7E-05 | 8.8E-04 | 6.2E-03 OK|
| P-Mass | 1.00 | 3.8E-04 | 7.3E-03 | 4.8 6.4E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.83 | 2.2E-11 | 8.4E-10 | 14.1 6.7E-02 OK|
| O-TurbFreq | 0.12 | 5.5E-10 | 3.3E-08 | 12.3 3.0E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 2 CPU SECONDS = 4.119E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.06 | 5.9E-06 | 1.4E-04 | 2.4E-01 ok|
| V-Mom | 0.06 | 5.9E-06 | 1.5E-04 | 2.3E-01 ok|
| W-Mom | 0.06 | 5.4E-06 | 6.6E-05 | 6.6E-01 ok|
| P-Mass | 1.31 | 5.0E-04 | 5.7E-03 | 4.8 3.7E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.57 | 1.3E-11 | 4.8E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 0.56 | 3.1E-10 | 1.6E-08 | 12.3 3.8E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 3 CPU SECONDS = 4.158E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.61 | 3.6E-06 | 7.0E-05 | 2.4E-01 ok|
| V-Mom | 0.60 | 3.5E-06 | 7.4E-05 | 2.3E-01 ok|
| W-Mom | 0.82 | 4.4E-06 | 4.2E-05 | 4.9E-01 ok|
| P-Mass | 0.39 | 1.9E-04 | 2.2E-03 | 4.8 5.9E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 1.78 | 2.2E-11 | 8.7E-10 | 14.1 6.9E-02 OK|
| O-TurbFreq | 0.55 | 1.7E-10 | 8.7E-09 | 12.3 5.6E-04 OK|
+----------------------+------+---------+---------+------------------+
----------------------------------------------------------------------
COEFFICIENT LOOP ITERATION = 4 CPU SECONDS = 4.198E+04
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.60 | 2.2E-06 | 3.7E-05 | 1.8E-01 ok|
| V-Mom | 0.60 | 2.1E-06 | 4.9E-05 | 1.7E-01 ok|
| W-Mom | 0.80 | 3.5E-06 | 4.4E-05 | 1.5E-01 ok|
| P-Mass | 0.42 | 8.0E-05 | 1.3E-03 | 4.8 5.5E-02 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.54 | 1.2E-11 | 4.5E-10 | 14.1 7.6E-02 OK|
| O-TurbFreq | 0.41 | 7.0E-11 | 5.4E-09 | 12.3 8.3E-04 OK|
+----------------------+------+---------+---------+------------------+
CFD Solver finished: Fri Nov 18 01:15:46 2016
CFD Solver wall clock seconds: 3.5033E+03
======================================================================
Termination and Interrupt Condition Summary
======================================================================
CFD Solver: Run duration reached
(Maximum simulation time)
======================================================================
Boundary Flow and Total Source Term Summary
======================================================================
+--------------------------------------------------------------------+
| U-Mom-PEEK |
+--------------------------------------------------------------------+
Boundary : inlet -4.9066E-04
Boundary : outlet 4.5811E-03
Boundary : wall -1.5020E+01
Immersed Solid : DRILL 1.2608E+01
Neg Accumulation : PEEK -2.2818E-06
-----------
Domain Imbalance : -2.4083E+00
+--------------------------------------------------------------------+
| V-Mom-PEEK |
+--------------------------------------------------------------------+
Boundary : inlet -3.4328E-04
Boundary : outlet 2.8311E-04
Boundary : wall 5.7450E+00
Immersed Solid : DRILL -5.2647E+00
Neg Accumulation : PEEK 4.8208E-06
-----------
Domain Imbalance : 4.8027E-01
+--------------------------------------------------------------------+
| W-Mom-PEEK |
+--------------------------------------------------------------------+
Boundary : inlet 6.0479E+03
Boundary : outlet -2.0870E-02
Boundary : wall -4.1958E+03
Domain Src (Neg) : PEEK -1.0660E-04
Immersed Solid : DRILL -1.9182E+03
Neg Accumulation : PEEK -6.7551E-05
-----------
Domain Imbalance : -6.6126E+01
+--------------------------------------------------------------------+
| P-Mass-PEEK |
+--------------------------------------------------------------------+
Boundary : inlet 4.2828E-04
Boundary : outlet -4.2821E-04
-----------
Domain Imbalance : 6.4045E-08
+--------------------------------------------------------------------+
| Normalised Imbalance Summary |
+--------------------------------------------------------------------+
| Equation | Maximum Flow | Imbalance (%) |
+--------------------------------------------------------------------+
| U-Mom-PEEK | 6.0479E+03 | -0.0398 |
| V-Mom-PEEK | 6.0479E+03 | 0.0079 |
| W-Mom-PEEK | 6.0479E+03 | -1.0934 |
| P-Mass-PEEK | 4.2828E-04 | 0.0150 |
+----------------------+-----------------------+---------------------+
======================================================================
Wall Force and Moment Summary
======================================================================
Notes:
1. Pressure integrals exclude the reference pressure. To include
it, set the expert parameter 'include pref in forces = t'.
2. These quantities are evaluated in a reference frame fixed to
the initial domain orientation and are not rotated if the orientation
changes (e.g. transient run or specified rotational offset).
+--------------------------------------------------------------------+
| Pressure Force On Walls |
+--------------------------------------------------------------------+
X-Comp. Y-Comp. Z-Comp.
Domain Group: PEEK
wall 1.5690E+01 -5.7818E+00 4.0760E+03
----------- ----------- -----------
Domain Group Totals : 1.5690E+01 -5.7818E+00 4.0760E+03
+--------------------------------------------------------------------+
| Viscous Force On Walls |
+--------------------------------------------------------------------+
X-Comp. Y-Comp. Z-Comp.
Domain Group: PEEK
wall -6.6946E-01 3.6805E-02 1.1972E+02
----------- ----------- -----------
Domain Group Totals : -6.6946E-01 3.6805E-02 1.1972E+02
+--------------------------------------------------------------------+
| Pressure Moment On Walls |
+--------------------------------------------------------------------+
X-Comp. Y-Comp. Z-Comp.
Domain Group: PEEK
wall 7.4261E-01 8.3577E-01 4.3412E-08
----------- ----------- -----------
Domain Group Totals : 7.4261E-01 8.3577E-01 4.3412E-08
+--------------------------------------------------------------------+
| Viscous Moment On Walls |
+--------------------------------------------------------------------+
X-Comp. Y-Comp. Z-Comp.
Domain Group: PEEK
wall 4.4297E-03 -2.7534E-02 -1.0009E-01
----------- ----------- -----------
Domain Group Totals : 4.4297E-03 -2.7534E-02 -1.0009E-01
+--------------------------------------------------------------------+
| Locations of Maximum Residuals |
+--------------------------------------------------------------------+
| Equation | Domain Name | Node Number |
+--------------------------------------------------------------------+
| X-Disp | PEEK | 1 |
| Y-Disp | PEEK | 1 |
| Z-Disp | PEEK | 1 |
+----------------------+-----------------------+---------------------+
| U-Mom | PEEK | 123901 |
| V-Mom | PEEK | 67054 |
| W-Mom | PEEK | 1001063 |
| P-Mass | PEEK | 77047 |
+----------------------+-----------------------+---------------------+
| K-TurbKE | PEEK | 942039 |
| O-TurbFreq | PEEK | 847306 |
+----------------------+-----------------------+---------------------+
+--------------------------------------------------------------------+
| Average Scale Information |
+--------------------------------------------------------------------+
Domain Name : PEEK
Global Length = 1.4446E-02
Minimum Extent = 9.1231E-03
Maximum Extent = 1.1800E-01
Density = 1.3100E+03
Dynamic Viscosity = 3.5000E+02
Velocity = 1.0058E-01
Advection Time = 1.4363E-01
RMS Courant Number = 8.9091E+01
Maximum Courant Number = 3.9960E+03
Reynolds Number = 5.4385E-03
+--------------------------------------------------------------------+
| ERROR #002100004 has occurred in subroutine Out_Scales_Flu. |
| Message: |
| The Reynolds number is outside of the range expected based on the |
| Option selected for the TURBULENCE MODEL. Check this setting, |
| the values of the properties, mesh scale, consistency of units |
| and solution values in the input file. Execution will proceed. |
+--------------------------------------------------------------------+
Domain Name : DRILL
Global Length = 1.0923E-02
Minimum Extent = 5.4999E-03
Maximum Extent = 1.0000E-01
+--------------------------------------------------------------------+
| Variable Range Information |
+--------------------------------------------------------------------+
Domain Name : PEEK
+--------------------------------------------------------------------+
| Variable Name | min | max |
+--------------------------------------------------------------------+
| Mesh Coordinates x | -4.56E-03 | 4.56E-03 |
| Mesh Coordinates y | -4.56E-03 | 4.56E-03 |
| Mesh Coordinates z | -1.30E-02 | 1.05E-01 |
| Total Mesh Displacement X | 0.00E+00 | 0.00E+00 |
| Total Mesh Displacement Y | 0.00E+00 | 0.00E+00 |
| Total Mesh Displacement Z | 0.00E+00 | 0.00E+00 |
| Density | 1.31E+03 | 1.31E+03 |
| Specific Heat Capacity at Constant Pressure| 1.34E+00 | 1.34E+00 |
| Dynamic Viscosity | 3.50E+02 | 3.50E+02 |
| Thermal Conductivity | 2.50E-01 | 2.50E-01 |
| Thermal Expansivity | 1.00E-05 | 1.00E-05 |
| Static Entropy | 0.00E+00 | 0.00E+00 |
| Velocity u | -2.52E-01 | 2.56E-01 |
| Velocity v | -2.48E-01 | 2.52E-01 |
| Velocity w | -3.22E-05 | 2.09E+00 |
| Pressure | 4.98E+05 | 9.32E+07 |
| Turbulence Kinetic Energy | 4.79E-32 | 1.73E-12 |
| Turbulence Eddy Frequency | 2.26E+06 | 1.17E+11 |
| Eddy Viscosity | 1.80E-37 | 1.01E-15 |
| Temperature | 2.98E+02 | 2.98E+02 |
| Wall Scale | -2.02E-08 | 4.32E-06 |
| Wall Distance | 0.00E+00 | 2.91E-03 |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| CPU Requirements of Numerical Solution - Total |
+--------------------------------------------------------------------+
Subsystem Name Discretization Linear Solution
(secs. %total) (secs. %total)
----------------------------------------------------------------------
Mesh Displacement 8.98E+02 2.1 % 4.20E+02 1.0 %
Wall Scale 4.36E+02 1.0 % 4.16E+02 1.0 %
Momentum and Mass 1.95E+04 45.9 % 4.38E+03 10.3 %
TurbKE and TurbFreq 3.87E+03 9.1 % 2.04E+03 4.8 %
-------- ------- -------- ------
Subsystem Summary 2.47E+04 58.2 % 7.26E+03 17.1 %
File Reading 7.30E+00 0.0 %
Variable Updates 1.96E+03 4.6 %
File Writing 2.01E+03 4.7 %
Miscellaneous 6.53E+03 15.4 %
--------
Total 4.25E+04
+--------------------------------------------------------------------+
| Job Information at End of Run |
+--------------------------------------------------------------------+
Job finished: Fri Nov 18 01:15:59 2016
Total wall clock time: 3.543E+03 seconds
or: ( 0: 0: 59: 3.460 )
( Days: Hours: Minutes: Seconds )
--> Final synchronization point reached by all partitions.
End of solution stage.
+--------------------------------------------------------------------+
| The following transient and backup files written by the ANSYS CFX |
| solver have been saved in the directory |
| D:/Extrud/pum_pum_1_pending/dp0_CFX_1_Solution_1/Fluid Flow |
| CFX_001: |
| |
| 9_full.trn, 8_full.trn, 7_full.trn, 6_full.trn, 5_full.trn, |
| 4_full.trn, 3_full.trn, 2_full.trn, 1_full.trn, 19_full.trn, |
| 18_full.trn, 17_full.trn, 16_full.trn, 15_full.trn, 14_full.trn, |
| 13_full.trn, 12_full.trn, 11_full.trn, 10_full.trn, 0_full.trn |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| The results from this run of the ANSYS CFX Solver have been |
| written to D:/Extrud/pum_pum_1_pending/dp0_CFX_1_Solution_1/Fluid |
| Flow CFX_001.res |
+--------------------------------------------------------------------+
+--------------------------------------------------------------------+
| For CFX runs launched from Workbench, the final locations of |
| directories and files generated may differ from those shown. |
+--------------------------------------------------------------------+
This run of the ANSYS CFX Solver has finished.
и еще несколько изображений
Всем спасибо за помощь за ранее
Добавить комментарий