Всем привет! Делаю расчет осевого вентилятора, понимаю, что скорее всего мне не хватает мощности ПК, но хочу хотя бы как-нибудь сделать расчет. Modal выдает такие ошибки, что можно сделать? Они возникают только если в сборке есть болты, гайки и т.д. Если убрать все крепежные элементы расчет получается
*** WARNING *** CP = 54.438 TIME= 20:51:54
The damped eigensolver did not find a damping matrix. For efficiency,
please use an eigensolver that does not consider damping to solve this
model.
*** ERROR *** CP = 138.547 TIME= 20:53:20
There is not enough memory for the Distributed Sparse Matrix Solver to
proceed using the out-of-core memory mode. The total memory required
by all processes = 16697 MB. The total physical memory that is
available on the system = 14674 MB. Please decrease the model size,
or run this model on another system with more physical memory.
*** ERROR *** CP = 138.547 TIME= 20:53:20
Distributed Sparse Matrix Solver failure. Please check the error file
for possible causes.
*** ERROR *** CP = 138.547 TIME= 20:53:20
An error occured inside DSP solver
Call to DSP Routine dsp_allocFinalMem failed (info=1).
*** WARNING *** CP = 138.547 TIME= 20:53:20
Fewer modes than the requested number of modes ( 8 ) were computed.
There are only 0 modes beyond the begin frequency of FREQB= 0.
*** ERROR *** CP = 138.859 TIME= 20:53:20
Distributed Sparse Matrix Solver failure. Please check the error file
for possible causes.
*** ERROR *** CP = 138.859 TIME= 20:53:20
An error occured inside DSP solver
Call to DSP Routine dsp_allocFinalMem failed (info=1).
*** ERROR *** CP = 138.859 TIME= 20:53:20
Distributed Sparse Matrix Solver failure. Please check the error file
for possible causes.
*** ERROR *** CP = 138.859 TIME= 20:53:20
Distributed Sparse Matrix Solver failure. Please check the error file
for possible causes.
*** ERROR *** CP = 138.859 TIME= 20:53:20
An error occured inside DSP solver
Call to DSP Routine dsp_allocFinalMem failed (info=1).
*** ERROR *** CP = 138.859 TIME= 20:53:20
An error occured inside DSP solver
Call to DSP Routine dsp_allocFinalMem failed (info=1).
NUMBER OF WARNING MESSAGES ENCOUNTERED= 3
NUMBER OF ERROR MESSAGES ENCOUNTERED= 9
***** PROBLEM TERMINATED BY INDICATED ERROR(S) OR BY END OF INPUT DATA *****
+--------- D I S T R I B U T E D A N S Y S S T A T I S T I C S ------------+
Release: 2021 R1 Build: 21.1 Update: UP20201109 Platform: WINDOWS x64
Date Run: 04/13/2022 Time: 20:53 Process ID: 2208
Operating System: Windows 10 (Build: 19043)
Processor Model: Intel(R) Core(TM) i5-9300HF CPU @ 2.40GHz
Compiler: Intel(R) FORTRAN Compiler Version 19.0.0 (Build: 20190206)
Intel(R) C/C++ Compiler Version 19.0.0 (Build: 20190206)
Intel(R) Math Kernel Library Version 2020.0.0 Product Build 20191125
Number of machines requested : 1
Total number of cores available : 8
Number of physical cores available : 4
Number of processes requested : 4
Number of threads per process requested : 1
Total number of cores requested : 4 (Distributed Memory Parallel)
MPI Type: INTELMPI
MPI Version: Intel(R) MPI Library 2018 Update 3 for Windows* OS
Эта ошибка дословно говорит о недостатке оперативной памяти для решателя.
Вы можете попробовать уменьшить размерность модели, использовать итерационный решатель или установить больше оперативной памяти в компьютер.
Добавить комментарий